- 比利時StuvEX防爆與防火設備
- 美國RCS腐蝕產品監測設備
- 盧森堡ROTAREX羅達萊克斯滅火系...
- 意大利GM SISTEMI火花探測及...
- 西班牙ADIX安迪克斯抑制爆炸系統
- 備盈倍BS&B防爆**系統
- 賀爾碧格Newson Gale防爆靜...
- 賀爾碧格hoerbiger防爆**系...
- 意大利Aircom愛科粉塵防爆設備
- 法國Stif斯緹福粉塵防爆設備
- 西班牙Adix安迪克斯隔爆閥抑制系統...
- 瑞士Rico瑞科爆炸隔離閥
- 意大利Control logic康洛...
- 意大利Control logic康洛...
- 意大利科恩除塵和防爆產品
- 美國Argus火花和金屬探測以及回收...
- 美國Edwards愛德華消防報警系統
- 美國Kidde凱德廚房滅火和空氣采樣...
- 美國Marioff HI-FOG高壓...
- 挪威納斯克激光氣體分析儀
- 德國Rembe認必泄壓爆破片及隔離塵...
- 英國Amal阻火器
- 英國Marvac呼吸閥和緊急泄放閥以...
- 英國Marston防爆板和爆破片
- 美國ZOOK防爆板
- 瑞士Rico-Ventex隔爆閥
- 德國GreCon格雷康火花探測器以及...
- 德國Eltex埃爾特克斯防爆靜電接地...
- 美國迪康氣體檢測設備
- 美國PAC實驗室和在線分析儀器
- 奧德姆/安姆特儀器產品
- 美盛環境監測行業成套系統工程
- 美盛流體污染控制，過濾，分離凈化產品
- 美國Norman不銹鋼高壓過濾器
- 美國施羅德過濾器以及過濾系統
- 韓國杜科給水設備以及泵系統
- 美國Cameron卡麥龍過程控制和閥...
- 美國BARTON測量儀器儀表
- 美國NUFLO儀表產品
- 美國clif mock采樣設備和系統
- Caldon超聲波技術產品
- 美國Cameron/Barton卡麥...
- 美國Pentail濱特爾油液凈化設備...
- 韓國雷尊泰克REZONTECH火焰探...
- 韓國CSA Bestouch火焰探測...
- 科馬特泰克色譜技術產品
- 英國愛丁堡Edinburgh ins...
- 歐美Cerex/AquaRead等進...
- 歐文凱利自控閥設備
- 德爾格Draeger**檢測設備
- 美國Det-tronics火焰探測器...
- 泵閥控制
- 美國Honeywell生命**產品
- 密析爾濕度和露點儀表
- 美國TIF公司鹵素檢漏儀
- 美國Teledyne Analyti...
- 美國泰科SCOTT健康和**
- 日本日置HIOKI電測產品
- 英國梅克羅尼（MICRONICS）超...
- 美國AII氧分析儀
產品詳情
簡單介紹：
InstaTrans (3001) Oxygen Transmitter氧變送器特點:1,二線制,輸出4-20MA,現場安裝的NEMA-4機殼2,量程可從PPM切換到%VOL濃度3,6種量程可選擇,4,可用于本安區域和防爆區域,用于1區或同等級區域時需增加**珊
詳情介紹：
InstaTrans (3001) Oxygen Transmitter氧變送器
InstaTrans (3001) Oxygen Transmitter氧變送器
特點:
1,二線制,輸出4-20MA,現場安裝的NEMA-4機殼
2,量程可從PPM切換到%VOL濃度
3,6種量程可選擇,
4,可用于本安區域和防爆區域,用于1區或同等級區域時需增加**珊
Model InstaTrans (3001) Oxygen Transmitter
The Insta Trans is a two-wire, loop-powered 4-20 mA oxygen transmitter packaged within a weather tight NEMA-4 housing. The product was named for its built-in level of flexibility. It can instantly transform from ppm to percent (or vice-versa) simply by changing out the Teledyne sensor and resetting the range scale of the unit to ppm or percent via the function keypad.
The Insta Trans has six user selectable ranges from 0-10 ppm to 0-25 %. The user can easily change to the preferred range via the built in function keypad. In addition, depending on the corrosive nature of the sample, the Insta Trans can be supplied with either stainless steel or nylon wetted parts.
Intrinsically Safe Design
The Insta Trans can be used in a general purpose, nonhazardous environment or a hazardous area. When used in Division 1 or equivalent hazardous / classified locations, the Insta Trans must be installed in conjunction with optional intrinsic safety barriers. The Insta Trans is designed as instrinsically safe for use in Class I, Division 1, Groups A, B, C, & D hazardous areas or EExiaIICT4 (60°C), and certified by Factory Mutual, BASEEFA, and ATEX.
The Insta Trans is self-certified by Teledyne as suitable for Class I, Division 2 areas without the use of I/S barriers utilizing specific installation guidelines.
This unit monitors oxygen in nitrogen, hydrogen, argon, ethylene, butadiene, and other pure gases and gas mixtures. Applications for this unit include process control in many industries as well as quality assurance.
Consider the InstaTrans for such uses as:
InstaTrans (3001) Oxygen Transmitter氧變送器
特點:
1,二線制,輸出4-20MA,現場安裝的NEMA-4機殼
2,量程可從PPM切換到%VOL濃度
3,6種量程可選擇,
4,可用于本安區域和防爆區域,用于1區或同等級區域時需增加**珊
| Industrial Products |
 | |
 | |
The Insta Trans is a two-wire, loop-powered 4-20 mA oxygen transmitter packaged within a weather tight NEMA-4 housing. The product was named for its built-in level of flexibility. It can instantly transform from ppm to percent (or vice-versa) simply by changing out the Teledyne sensor and resetting the range scale of the unit to ppm or percent via the function keypad.
The Insta Trans has six user selectable ranges from 0-10 ppm to 0-25 %. The user can easily change to the preferred range via the built in function keypad. In addition, depending on the corrosive nature of the sample, the Insta Trans can be supplied with either stainless steel or nylon wetted parts.
Intrinsically Safe Design
The Insta Trans can be used in a general purpose, nonhazardous environment or a hazardous area. When used in Division 1 or equivalent hazardous / classified locations, the Insta Trans must be installed in conjunction with optional intrinsic safety barriers. The Insta Trans is designed as instrinsically safe for use in Class I, Division 1, Groups A, B, C, & D hazardous areas or EExiaIICT4 (60°C), and certified by Factory Mutual, BASEEFA, and ATEX.
The Insta Trans is self-certified by Teledyne as suitable for Class I, Division 2 areas without the use of I/S barriers utilizing specific installation guidelines.
This unit monitors oxygen in nitrogen, hydrogen, argon, ethylene, butadiene, and other pure gases and gas mixtures. Applications for this unit include process control in many industries as well as quality assurance.
Consider the InstaTrans for such uses as:
- Monitoring inert gas blanketing
- Air separation and liquefaction
- Chemical feedstock analysis
- Semiconductor manufacturing
- Petrochemical process control
- Monitoring inert gas generators
- Controlled atmosphere food packaging
- Heat treating / bright annealing
- Quality assurance
- Gas purity certification
- Gas pipeline leak detection
- Welding of exotic metals
- Nuclear fuel processing
- Flue gas analysis