- 比利時StuvEX防爆與防火設備
- 美國RCS腐蝕產品監測設備
- 盧森堡ROTAREX羅達萊克斯滅火系...
- 意大利GM SISTEMI火花探測及...
- 西班牙ADIX安迪克斯抑制爆炸系統
- 備盈倍BS&B防爆**系統
- 賀爾碧格Newson Gale防爆靜...
- 賀爾碧格hoerbiger防爆**系...
- 意大利Aircom愛科粉塵防爆設備
- 法國Stif斯緹福粉塵防爆設備
- 西班牙Adix安迪克斯隔爆閥抑制系統...
- 瑞士Rico瑞科爆炸隔離閥
- 意大利Control logic康洛...
- 意大利Control logic康洛...
- 意大利科恩除塵和防爆產品
- 美國Argus火花和金屬探測以及回收...
- 美國Edwards愛德華消防報警系統
- 美國Kidde凱德廚房滅火和空氣采樣...
- 美國Marioff HI-FOG高壓...
- 挪威納斯克激光氣體分析儀
- 德國Rembe認必泄壓爆破片及隔離塵...
- 英國Amal阻火器
- 英國Marvac呼吸閥和緊急泄放閥以...
- 英國Marston防爆板和爆破片
- 美國ZOOK防爆板
- 瑞士Rico-Ventex隔爆閥
- 德國GreCon格雷康火花探測器以及...
- 德國Eltex埃爾特克斯防爆靜電接地...
- 美國迪康氣體檢測設備
- 美國PAC實驗室和在線分析儀器
- 奧德姆/安姆特儀器產品
- 美盛環境監測行業成套系統工程
- 美盛流體污染控制，過濾，分離凈化產品
- 美國Norman不銹鋼高壓過濾器
- 美國施羅德過濾器以及過濾系統
- 韓國杜科給水設備以及泵系統
- 美國Cameron卡麥龍過程控制和閥...
- 美國BARTON測量儀器儀表
- 美國NUFLO儀表產品
- 美國clif mock采樣設備和系統
- Caldon超聲波技術產品
- 美國Cameron/Barton卡麥...
- 美國Pentail濱特爾油液凈化設備...
- 韓國雷尊泰克REZONTECH火焰探...
- 韓國CSA Bestouch火焰探測...
- 科馬特泰克色譜技術產品
- 英國愛丁堡Edinburgh ins...
- 歐美Cerex/AquaRead等進...
- 歐文凱利自控閥設備
- 德爾格Draeger**檢測設備
- 美國Det-tronics火焰探測器...
- 泵閥控制
- 美國Honeywell生命**產品
- 密析爾濕度和露點儀表
- 美國TIF公司鹵素檢漏儀
- 美國Teledyne Analyti...
- 美國泰科SCOTT健康和**
- 日本日置HIOKI電測產品
- 英國梅克羅尼（MICRONICS）超...
- 美國AII氧分析儀
GD1激光開路氣體探測器由美盛科技中國有限公司供應
可調激光二極管
上等穩定性
快速的H2S氣體探測技術
無需標定
GD1激光開路氣體探測器
GD1激光開路氣體探測器由美盛科技中國有限公司供應
可調激光二極管
上等穩定性
快速的H2S氣體探測技術
無需標定
總覽:
The Simtronics GD1 sets a new standard for toxic gas detection. Using a tuneable laser diode, the GD1 delivers enhanced coverage and fail safe detection. The performance improvement marks a genuine step change for safety systems and life cycle cost savings.
The GD1 has been designed with features that provide an effective response to the detection of gas hazards in a wide range of industrial environments from offshore production facilities to wastewater treatment plants.At the heart of the detector is a tuneable laser diode that eliminates environmental effects from sun, rain and fog. The laser scans single absorption lines where there is no interference from other gases.
Unlike traditional methods for detecting H2S (MOS or EC cell) the GD1 needs no recalibration and can replace multiple standard detectors to cover the same risk. The complete optomechan ical design and construction is so stable that an ultra fast speed of response can be achieved whilst providing unparalleled service life and detector stability, thus saving on maintenance and service costs.
Supplied with worldwide hazardous area approvals. Suitable for use in systems with SIL 2 requirement.
技術參數:| GENERAL | |
| Type | Gas detector |
| Product | GD1 |
| Product code | GD1-L0P-31KH-0XH-A0 |
| Manufacturer | Simtronics |
| GAS DETECTOR | |
| Type | Laser Open Path Gas Detector |
| Design principle | Near IR Laser Scanning |
| IR Source | Tuneable laser diode, Laser Class 1, eye safe |
| Calibrated gas | Hydrogen sulphide (H2S) |
| Detected gases | Target gas only |
| Calibrated range | 0 – 200 ppm.m 0 - 500 ppm.m 0 - 1000 ppm.m 0 - 2000 ppm.m 0 - 5000 ppm.m 0- 20000 ppm.m |
| Path length | 5 – 50m; 5 - 75m (long range) |
| PERFORMANCE | |
| Zero point stability | ±2%, Relative to full scale deflection (FS) |
| Span stability | ±3% FS |
| Response time | 5 sec |
| Tolerable Obscuration | ≤98% |
| Calibration interval | Fixed factory calibrated. No field calibration required. |
| ELECTRICAL | |
| Power supply | 24V DC, (range 18 - 32V DC) |
| Power consumption | 15W max (TX: 10W + Rx: 5W) |
| Cable entry | M20 |
| Heated Optics | Yes |
| Junction box | Supplied with Exe junction box for Transmitter (Tx) and Receiver (Rx). |
| Connection | 0.5 mm2 (20 AWG) - 2.5 mm2 (14 AWG), 3 wires |
| Analogue output signal | 0-20mA, max. load impedance 500?. |
| Fault signalling | Diagnosis signalling in the 0.4 - 3.0mA range |
| Maintenance interface | HART v6.0 Universal Commands |
| ENVIRONMENT | |
| Storage | -40°C to +70°C (-40°F to 158°F) |
| Operation | -40°C to +65°C (-4°F to 149°F) |
| ATEX flameproof | -55°C to +75°C (-67°F to 167°F) |
| Humidity | 100% RH (non-condensing) |
| Ingress | IP66 / IP67 DIN 60529 |
| RFI/EMI | Complies with EN 61000-6-2, EN 61000-6-4, EN 50270, EN 60945 |
| HOUSING | |
| Ex Classification | Tx/Rx: ATEX II 2 G EExd IIC T5 JB: ATEX II 2 G EEx e T6 |
| Material | 316 L stainless steel |
| Weight | Tx/Rx: 5.5 Kg (12 lbs), JB: 2.0 Kg (4.4 lbs) |
| Dimensions | 205L x 115W x 248H (mm), 8.1 x 4.3 x 9.8 (inches) |
| APPROVALS | |
| ATEX | DNV 2008 ATEX 18877X |
| IECEX | DNV 10.0002X |
| Ingress | IP66/IP67 IEC 60529 |
| SIL | Suitable for use in SIL2 systems |
| ACCESSORIES | |
| GD1-X00-TT01 | Alignment kit |
| GD1-X00-TT05 | Test cell |
文檔:
Product Sheet H2S398.36 KB
Product Sheet CO2596.80 KB
Operating Manual (English)2.13 MB
GD1 Drawing240.55 KB
DNV ATEX Certification239.80 KB
DNV IECEx Certification91.57 KB
CE Declaration189.91 KB
SIL 2 Declaration272.91 KB
應用:
- FPSO / FSO / MOPU
- Marine / Jack Up Rigs
- Oil & Gas Onshore Drilling Rigs
- Chemical and Petrochemical Plants
- Waste Disposal
- Gas Turbines
- General Industry