特性:

 

• Low temperature catalytic oxidation detector
• Very long lifetime
• Good resistance to catalytic poisons (e.g. Silicone) and halogenated agents
• Large temperature range
• Available in aluminium only
• HART (R) option
•  
•  
• 總覽:

• The MultiXplo DM-TX6 intelligent catalytic sensor based flammable gas detector used to detect a wide range of gases, including hydrogen (H2). The device has been designed for ease of installation, operation and maintenance in testing environments.

  The DM-TX6 uses a computer matched pair of poison resistant pellistor beads to provide reliable flammable gas detection performance in harsh environments, provided oxygen is present. 

  The intelligent, microprocessor driven unit is fully configurable using a wireless handheld terminal (TLU] giving true flexibility to the installer. Parameters such as relay operation and alarm levels are all set via the TLU, hazardous area approved handheld unit.  In addition, the sensor element is protected by the onboard electronics to prevent exposure to over-range LEL gas concentrations. This helps reduce ongoing maintenance and service costs.

  The device offers a wide range of output options as standard and is suitable for use in SIL 2 appLications. The unit may be interfaced directly with a wide range of panels, controllers and PLC·s etc. 
  
  技術(shù)參數(shù):
  
  

  GENERAL
  Type	Gas detector
  Product	Simtronics MultiXplo
  Product code	DM-TX6
  Manufacturer	Simtronics
  GAS DETECTOR
  Type	Point Catalytic Gas Detector
  Technology	Low temperature oxidation process, Oxycol™
  Detected gases	Combustible gases, including Hydrogen (H2)
  Calibrated range	0 – 100 %LEL
  PERFORMANCE
  Accuracy	±5% of calibrated range
  Repeatibility	±1%
  Stability	±3% (zero point)
  Response time	T90 < 10 sec (Methane)
  Calibration interval	3 months
  Sensor life	Better than 5 years
  Sensor protection	Over range protection
  ELECTRICAL
  Power supply	24V DC, range (18 - 32V DC)
  Power consumption	65 mA normal
  Cable entry	2x M20, one entry with Exd plug
  Junction box	“No-touch” field cabling”, detector replaceable without opening cable glands
  Connection	0.3 mm2 (22 AWG) - 1.5 mm2 (16 AWG), 3 or 4 wires
  Analogue output signal	0-20mA, source, max. load impedance 700?.
  Fault signalling	Diagnosis signalling in the 2.0 - 3.4mA range
  Relays	2 configurable relays for alarm and fault
  Maintenance interface	Wireless (IR) handheld terminal for configuration, test and diagnosis
  ENVIRONMENT
  Storage	-40°C to +70°C (-40°F to 158°F)
  Operation	-20°C to +60°C (-4°F to 140°F)
  Humidity	95% RH (non-condensing)
  Ingress	IP66
  RFI/EMI	Complies with EN50081-1, EN50081-2, EN50082-1 and EN50082-2.
  HOUSING
  Ex Classification	Ex d II C T6
  Material	Epoxy coated aluminium  or Stainless steel (Specify variant)
  Weight	Aluminium: 1.8 Kg (4.0 lbs)   Stainless steel: 6.5 Kg (14.3 lbs)
  Dimensions	165H  x 118D x 184W (mm),   6.50H x 4.65D x 7.25W (inches)
  APPROVALS
  ATEX	Certificate DM LCIE 03 ATEX 6263
  IECEx	Certificate DM IECEx LCI09.0018
  ACCESSORIES
  TLU600	Infrared remote control unit
  AS008-200	Sunshade
  AS005	Calibration cup
  AS011-2-X	Sample flow housing
  AS019	Splash guard

  
  
  
  文檔:
  
   

  Product Sheet318.52 KB

  Operating Manual2 MB

  Operating Manual (Italian)997.57 KB
  
  
  證書:
  
  

  •  

  ATEX Certificate2.06 MB

  CE Declaration44.57 KB

  EC Type Examination Certification252.3 KB

  IP66 Verification227.67 KB
  
  應(yīng)用:
  
  

• Refineries
• Offshore/offshore driling and production platforms
• Processing and storage plants
• Chemical and petrochemical plants
• Laboratories
• Hydrogen detection