- 比利時StuvEX防爆與防火設備
- 美國RCS腐蝕產品監測設備
- 盧森堡ROTAREX羅達萊克斯滅火系...
- 意大利GM SISTEMI火花探測及...
- 西班牙ADIX安迪克斯抑制爆炸系統
- 備盈倍BS&B防爆**系統
- 賀爾碧格Newson Gale防爆靜...
- 賀爾碧格hoerbiger防爆**系...
- 意大利Aircom愛科粉塵防爆設備
- 法國Stif斯緹福粉塵防爆設備
- 西班牙Adix安迪克斯隔爆閥抑制系統...
- 瑞士Rico瑞科爆炸隔離閥
- 意大利Control logic康洛...
- 意大利Control logic康洛...
- 意大利科恩除塵和防爆產品
- 美國Argus火花和金屬探測以及回收...
- 美國Edwards愛德華消防報警系統
- 美國Kidde凱德廚房滅火和空氣采樣...
- 美國Marioff HI-FOG高壓...
- 挪威納斯克激光氣體分析儀
- 德國Rembe認必泄壓爆破片及隔離塵...
- 英國Amal阻火器
- 英國Marvac呼吸閥和緊急泄放閥以...
- 英國Marston防爆板和爆破片
- 美國ZOOK防爆板
- 瑞士Rico-Ventex隔爆閥
- 德國GreCon格雷康火花探測器以及...
- 德國Eltex埃爾特克斯防爆靜電接地...
- 美國迪康氣體檢測設備
- 美國PAC實驗室和在線分析儀器
- 奧德姆/安姆特儀器產品
- 美盛環境監測行業成套系統工程
- 美盛流體污染控制，過濾，分離凈化產品
- 美國Norman不銹鋼高壓過濾器
- 美國施羅德過濾器以及過濾系統
- 韓國杜科給水設備以及泵系統
- 美國Cameron卡麥龍過程控制和閥...
- 美國BARTON測量儀器儀表
- 美國NUFLO儀表產品
- 美國clif mock采樣設備和系統
- Caldon超聲波技術產品
- 美國Cameron/Barton卡麥...
- 美國Pentail濱特爾油液凈化設備...
- 韓國雷尊泰克REZONTECH火焰探...
- 韓國CSA Bestouch火焰探測...
- 科馬特泰克色譜技術產品
- 英國愛丁堡Edinburgh ins...
- 歐美Cerex/AquaRead等進...
- 歐文凱利自控閥設備
- 德爾格Draeger**檢測設備
- 美國Det-tronics火焰探測器...
- 泵閥控制
- 美國Honeywell生命**產品
- 密析爾濕度和露點儀表
- 美國TIF公司鹵素檢漏儀
- 美國Teledyne Analyti...
- 美國泰科SCOTT健康和**
- 日本日置HIOKI電測產品
- 英國梅克羅尼（MICRONICS）超...
- 美國AII氧分析儀
產品詳情
簡單介紹：
OT-3 Natural Gas Oxygen measurement天然氣微氧分析儀The OT-3 is designed to accurately monitor the oxygen content in a wide variety of gases at the ppm level.
詳情介紹：
OT-3 Natural Gas Oxygen measurement天然氣微氧分析儀
The OT-3 is designed to accurately monitor the oxygen content in a wide variety of gases at the ppm level.
| Industrial Products |
 | |
 | |
The OT-3 is designed to accurately monitor the oxygen content in a wide variety of gases at the ppm level.
The transmitter is equipped with two oxygen analysis ranges (0-100 and 0-1000 ppm) and is acceptable for operation in Class I, Division 2, Groups B, C, and D hazardous environments when used in conjunction with a non-incendive power source such as the Elsag Baily Total Flow System.
The OT-3 is designed to work with TotalFlow model 6713, one of the predominant FCUs in the industry. Moreover, the system operates at as low as 9 VDC.
The heart of the OT-3 system is Teledyne's own Micro-fuel Cell oxygen sensor. This cell is a sealed electrochemical device which translates the amount of oxygen present in a sample into an electrical current. Since it is sealed, there is no electrolytes to change or electrodes to clean, and is therefore virtually maintenance free.
The OT-3 System is housed in a metal NEMA-4 case with the display visible through a clear Lexan window. For access to the Micro-fuel Cell and transmitter controls, the front door swings open.
Features
- Two analysis ranges, user selectable, 0-100 and 0-1000 ppm
- Designed to work with TotalFlow model 6713, one of the predominant FCUs in the industry
- Operates at as low as 9 VDC
- High sensitivity (0.5% FS)
- High accuracy (+/- 2% of full scale at constant temperature)
- Insensitive to flow variations
- Fast response and recovery
- Long, life maintenance free Micro-fuel Cell sensor
- Unaffected by reducing agents (HC's, CO, SO2, etc.)
- Easy to calibrate, no zero gas required
- Rugged NEMA-4 bulkhead mount enclosure
- Stainless steel sample system (nylon cell holder)
- H2S scrubber
 | |
| |
The OT-3H Natural Gas Oxygen Measurement System accurately monitors trace oxygen levels in a variety of gases at the ppm level.
The transmitter is equipped with two user-selectable oxygen analysis ranges and is acceptable for operation in Class I, Division 2, Groups B, C, and D hazardous environments when used in conjunction with a non-incendive power source.
The OT-3H system is housed in a weatherproof NEMA-4 case. For access to the Micro-fuel Cell and transmitter controls, the front door swings open. The transmitter is equipped with two oxygen analysis ranges (0-100 and 0-1000 ppm) and has an optional heating system.
The OT-3H is designed to work with a variety of Flow Computers, such as TotalFlow or FlowBoss, and the system can be ordered in either AC or DC powered versions.
The Sensor
The heart of the system is Teledyne’s own A-2CNG Microfuel Cell oxygen sensor. This cell is a sealed electrochemical device which translates the amount of oxygen present in a sample into an electrical current. And unlike other sensors on the market, it comes complete with a built-in acid gas scrubber.
Features
- Two analysis ranges, user selectable, 0-100 and 0-1000 ppm
- Designed to work with all flow computers in use
- AC or DC powered versions
- High sensitivity (0.5% FS)
- High accuracy (±1% of full scale at constant temperature)
- Insensitive to flow variations
- Fast response and recovery
- Long, life maintenance free Micro-fuel Cell sensor
- Unaffected by reducing agents (HC’s, CO, SO2, etc.)
- Easy to calibrate, no zero gas required
- Rugged NEMA-4 bulkhead mount enclosure
- Temperature regulation through an internal heater (optional)